| CAD CAM STONE: A type IV high strength low expansion die stone formulated especially for use with cad cam systems. It has an extended working time thereby enabling the pouring of multiple cases. Physical Properties: 20cc - 100grams, 12 - 14 minutes initial set time with a compression strength of up to 9,000 lbs. PSI / 62.05 MPA after 1 hour - up to 18,000 lbs. PSI / 124.1 MPA dry. Expansion .070 - .075 after 2 hours. |
|
|
Available in Chocolate, Cream and Super White
|
10 pound (4.5 kilo) Carton 25 pound (11.4 kilo) Carton 50 pound (22.5 kilo) Carton |
|
| LASER ROCK: A very fast setting die stone used to make a model of the mouth while the patient is still sitting in the chair. Laser Rock can be removed from the mold in just 5 minutes and has a low expansion of .12 after 2 hours. Physical Properties: 24cc to 100 grams, 1-1/2 - 2-1/2 minutes initial set, with a compression strength of up to 6,000 lbs. PSI/41.37 MPA after 1 hour - and up to 12,500 lbs. PSI/86.18 MPA dry. |
|
|
Available in Pink
|
4.5 pound (2 kilo) Jar 25 pound (11.4 kilo) Carton 50 pound (22.5 kilo) Carton
100 pound (45 kilo Drum) 140 gram Pouches |
|
| POUR BASE STONE: A very hard die stone formulated to pour almost like water and when it sets it's hard like a type IV die stone. Set time 11 - 13 minutes. Approximately 5-7 minutes of working time (start to mix). 24cc - 100 grams - compression strength of up to 4,800 lbs. PSI / 33.1 MPA after 1 hour - up to 7,400 lbs. PSI / 51.02 MPA dry. |
|
|
|
Available in Blue, Peach and Grey
|
25 pound (11.4 kilo) Carton 50 pound (22.5 kilo) Carton 100 pound (45 kilo Drum) |
|
| MOUNTING STONE: A high strength quick setting and low expansion stone used for mounting and articulating. Physical Properties: 26cc - 100 grams, 4 - 6 minutes setting time. Expansion .09 after 2 hours up to 5,000 lbs. PSI/34.47 MPA after 1hour - and up to 11,000 lbs. PSI/75.84 MPA dry. |
|
|
|
Available in White Only
|
25 pound (11.4 kilo) Carton 50 pound (22.5 kilo) Carton 100 pound (45 kilo Drum) |
|
|
